Logik Fan Oven Element Only Failed

Logik oven fan runs but the oven does not heat in fan mode, while conventional mode still works.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open-circuit circular fan element, Loose wiring to fan element, Faulty fan mode relay on PCB

Safety first: Isolate power and allow the oven to cool before removing the internal rear panel.

Confirm symptom: Test fan mode and conventional mode. If only fan mode fails, the circular element is suspect.
Access and test element: Remove the internal rear cover, disconnect the circular element, and measure resistance. Replace if open-circuit.
Check wiring and relay: Inspect wiring to the element and the corresponding relay on the PCB. Repair any damaged wiring and replace the PCB if the relay is not switching.

Medium 3/5

Fan Oven Element (Circular)

Check Price on Amazon

We may earn a commission from links on this page.