Magic Chef Unstable gas flame / safety valve or sensor issue

On a Magic Chef gas oven, burner lights but goes out shortly after, or cycles erratically.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Weak igniter not maintaining valve open, Faulty oven safety valve, Poor gas pressure or supply, Blocked burner orifice

How to Fix / Troubleshooting

Safety first: Turn off gas and power if you suspect a gas leak or unstable flame.

  • Inspect flame: The flame should be steady and mostly blue. Yellow, lifting, or noisy flames indicate issues.
  • Replace igniter: If the igniter is old, replacing the oven igniter often resolves intermittent flame issues.
  • Clean burner: Remove the burner and clean the orifice and ports with a soft brush and compressed air (no sharp tools).
  • Check gas supply: Ensure other gas appliances work normally. Low pressure may require a gas utility or plumber.

When to call a technician: Safety valve and gas pressure diagnostics should be handled by a professional.

Advertisements

Repair Difficulty

Hard 4/5

Required Part

Gas Oven Safety Valve
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements