Maytag
Broil circuit failure
Broil element not working but bake works normally
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Open broil element, burnt wire at broil element, failed broil relay on EOC, open high-limit thermostat in broil circuit
How to Fix / Troubleshooting
Safety First: Disconnect power before servicing.
- Inspect broil element: Look for visible damage. Remove mounting screws and pull element forward to inspect terminals.
- Test element: Measure resistance; replace if open.
- Check wiring: Inspect wires at the broil element for burns or loose connections.
- Test high-limit: Check any thermostats in the broil circuit for continuity.
- Replace EOC: If all else checks good, replace the control board.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements