Maytag Self-clean door lock failure

Oven door will not lock to start self-clean cycle

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed latch motor, misaligned latch, broken latch linkage, faulty door switch

Safety First: Disconnect power before accessing latch components.

Check door closure: Ensure the door closes fully and the door switch is actuated.
Test door switch: Use a multimeter to verify continuity when the door is closed.
Inspect latch mechanism: Access from top or rear and look for broken or bent parts.
Replace latch assembly: If the motor does not run or linkage is damaged, replace the latch assembly.

Hard 4/5

Oven Door Latch Assembly

Check Price on Amazon

We may earn a commission from links on this page.