Maytag
No heat condition
Oven will not heat at all on bake or broil (no error code displayed)
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Open bake element, open broil element, failed EOC relay, tripped thermal fuse or high-limit thermostat
How to Fix / Troubleshooting
Safety First: Disconnect power at the breaker before testing elements or opening panels.
- Check elements visually: Inspect the bake (bottom) and broil (top) elements for breaks, blisters, or burn marks.
- Test elements: Remove at least one wire from each element and measure resistance. A typical element reads 10–40 Ω. Infinite resistance indicates a bad element.
- Check thermal fuse/high-limit: Access the rear of the oven and locate the thermal fuse or high-limit thermostat on the back of the cavity. Test for continuity; an open fuse will prevent heating.
- Inspect control output: If elements and fuses are good, the EOC may not be sending power. This usually requires replacing the control board.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements