E11
Midea
Cooling Fan Feedback / Speed Error
Oven shows E11 and cooling fan runs continuously or not at all
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed cooling fan motor, Blocked cooling air passages, Faulty fan speed sensor (if equipped), Defective main control board fan driver
How to Fix / Troubleshooting
Safety first: Disconnect power at the breaker.
Inspect cooling fan and airflow:
- Remove the top or rear panel to access the cooling fan motor.
- Check for insulation, wiring, or debris obstructing the fan blades.
- Spin the fan by hand; it should move freely.
- If seized or noisy, replace the cooling fan motor.
Check wiring and operation:
- Inspect the fan wiring harness and connectors for damage or looseness.
- Restore power and run a short bake cycle; verify if the fan starts when the oven heats (use caution around moving parts and live voltage).
- If the fan never runs and voltage is not supplied, the main control board may be defective.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Cooling Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements