E16
Midea
Wi‑Fi Module Communication Error
Oven displays E16 and Wi‑Fi or smart connectivity features do not work
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty Wi‑Fi module, Loose Wi‑Fi antenna or harness, Firmware incompatibility, Main control board communication bus fault
How to Fix / Troubleshooting
Safety first: If only connectivity is affected, you can usually troubleshoot with power on, but avoid opening panels while energized unless qualified.
Basic reset:
- Power cycle the oven at the breaker for 5 minutes.
- After restoring power, attempt to reconnect the oven to your network following the Midea app instructions.
Inspect Wi‑Fi module (if accessible):
- Disconnect power and remove the control panel to locate the Wi‑Fi module and antenna.
- Ensure the module is firmly seated and the antenna cable is connected.
- If E16 persists, the Wi‑Fi module or main control board may need replacement.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements