Oven does not heat at all, display and lights work but no warmth in any mode
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Possible Causes
How to Fix / Troubleshooting
Safety first: Turn off power at the breaker and verify no voltage is present before removing panels.
Check power and safety devices:
- Inspect the terminal block for burnt wires or loose screws; repair as needed.
- Locate and test the thermal fuse and high-limit thermostats for continuity. Replace any that are open.
Test heating elements:
- Access the upper and lower elements from inside the cavity and rear panel.
- Disconnect one wire from each element and test for continuity.
- Replace any open elements with the correct Midea part.
If all elements and safety devices are good, the main control board is likely not sending power to the elements and should be replaced.