New World Clock / Display Power Loss

Oven clock/timer display is blank, but oven may still heat using manual controls.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Blown display fuse on PCB, failed clock module, loose connector to display, dimmed VFD/LED due to age

How to Fix / Troubleshooting

Safety first: Isolate the oven from mains before removing the control panel.

  • Check for backlight or faint display: In a dark room, see if any faint digits are visible. If so, the display itself may be failing.
  • Inspect wiring: Remove the control panel and check the connectors to the clock/display module. Reseat them firmly.
  • Internal fuse: Some New World timers have a small internal fuse. If accessible and blown, replace with the exact type and rating.
  • Replace clock module: If there is still no display, replace the entire clock/timer module with a compatible New World part.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Electronic Clock / Display Module
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements