OBH Nordica User Interface / Keypad Failure

Oven display works but buttons or touch controls do not respond or respond intermittently.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Damaged touch panel, Loose keypad ribbon cable, Moisture behind control glass, Faulty user interface PCB

How to Fix / Troubleshooting

Safety first: Disconnect mains power before removing the control panel.

Steps to fix:

  • Dry out moisture: If the issue started after cleaning or steam cooking, leave the door open and allow the control area to dry for several hours. Then perform a power reset.
  • Access control panel: Remove screws securing the front panel and gently pull it forward to expose the touch panel and ribbon cables.
  • Reseat ribbon cable: Disconnect and reconnect the keypad ribbon cable at both ends, ensuring it is fully inserted and locked.
  • Inspect for damage: Look for cracks in the touch glass or damage to the flexible cable. Replace the OBH Nordica-compatible touch panel or UI board if damaged.
  • Test: Reassemble, restore power, and verify that all buttons respond correctly.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Touch Control Panel / Keypad
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements