E13
Princess
Control Panel Overheat Error
Princess oven displays E13 and the display or touch panel becomes unresponsive after long use at high temperature.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Insufficient cooling airflow to control panel, Failed cooling fan, Damaged heat shield, Control board temperature sensor fault
How to Fix / Troubleshooting
Safety first: Turn off power and allow the oven to cool fully.
- Check installation: Ensure the oven is installed with correct clearances and that warm air can escape from the top front vent.
- Inspect cooling fan: Confirm that the cooling fan runs during and after cooking. If not, test and replace the fan motor as needed.
- Verify heat shields: Check that any foil or metal shields around the control panel are in place and not bent away.
If E13 recurs despite proper cooling, the control board's temperature sensing or protection circuit may be faulty and the board should be replaced.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Cooling Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements