E8
Princess
Clock / Timer Module Error
Oven shows E8 and the timer or clock functions do not operate correctly; programs may not start.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Faulty clock PCB, Corrupted firmware, Loose ribbon cable between clock and main board, Power surge damage
How to Fix / Troubleshooting
Safety first: Disconnect power before removing the control panel.
- Reset clock: Try a full power reset by switching off the breaker for 5–10 minutes, then reprogram the clock and attempt to start a cooking cycle.
- Check connections: Remove the front control panel and inspect the ribbon cable and connectors between the clock/timer module and the main control board. Reseat all connectors.
- Look for damage: Examine the clock PCB for burn marks, bulging capacitors, or corrosion.
If the clock module is defective, replace the clock/timer assembly specific to your Princess oven model. After replacement, set the time and test all functions.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Clock / Timer Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements