Proline Door Hinge or Seal Failure

Oven door not closing properly, heat escaping around edges, uneven cooking

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Worn or bent door hinges, Weak hinge springs, Compressed or torn door gasket, Misaligned door glass or frame

How to Fix / Troubleshooting

Safety first: Allow the oven to cool before working on the door.

  • Check hinge play: Open the door halfway and lift gently. Excessive movement indicates worn hinges.
  • Inspect gasket: Look for gaps, tears, or hardened sections in the door seal. Replace the gasket if damaged.
  • Hinge replacement: Remove the door (most Proline doors lift off at the hinges when opened to a specific angle). Replace both hinges as a pair to ensure even tension.
  • Re-align door: Refit the door and check alignment with the cabinet. Adjust hinge mounting screws if necessary.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Oven Door Hinges
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements