Rangemaster
Loose Inner or Outer Door Glass Panel
Oven door glass has become loose or rattles when opening/closing.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Broken glass clips, Loose retaining screws, Failed door adhesive pads, Impact damage to door assembly
How to Fix / Troubleshooting
Safety first: Ensure the glass is cool. Wear cut-resistant gloves when handling glass panels.
- 1. Remove door: Take the door off the cooker according to the manual (usually open slightly and lift off hinges).
- 2. Disassemble door: Lay the door on a soft surface and remove screws holding the inner and outer panels together.
- 3. Inspect fixings: Check plastic or metal clips and brackets that hold the glass. Replace any broken components.
- 4. Clean and reassemble: Clean glass edges and refit using new clips or adhesive pads as specified by Rangemaster. Tighten all screws evenly.
- 5. Refit door: Ensure the door engages fully on the hinges and closes correctly.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Door Glass Fixing Kit
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements