E8
Russell Hobbs
Convection Fan Motor Fault
Oven shows E8 and fan functions may be disabled; convection modes do not work.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Seized convection fan motor, Open-circuit fan motor winding, Obstruction preventing fan rotation, Faulty fan relay on main control PCB
How to Fix / Troubleshooting
Safety first: Disconnect mains power and allow the oven to cool before working near the fan.
- Check fan operation: Select a convection mode and listen for the fan. If it hums but does not spin, the motor may be seized or obstructed.
- Inspect fan blades: Remove the fan cover inside the oven cavity (usually a few screws). Check for food debris, foil, or grease buildup jamming the blades. Clean thoroughly.
- Spin test: With power off, spin the fan by hand. It should rotate freely. If stiff or grinding, the motor bearings are worn and the motor should be replaced.
- Access motor terminals: From the rear of the oven, locate the convection fan motor terminals. Check for loose or burnt connectors.
- Replace motor if faulty: Remove mounting screws, disconnect wiring, and fit a compatible Russell Hobbs convection fan motor. Ensure the fan blade is correctly positioned and secure.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Convection Fan Motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements