Russell Hobbs
No Power / Dead Appliance
Oven display and controls are dead; no lights, no response.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown internal fuse on control PCB, No mains supply at terminal block, Loose or burnt mains connections, Failed main control PCB power supply section
How to Fix / Troubleshooting
Safety first: Ensure the oven is isolated before opening any covers.
- Check household supply: Verify the cooker switch is on and the circuit breaker has not tripped. Test the outlet with another appliance if possible.
- Inspect terminal block: Access the rear terminal block and confirm live, neutral, and earth wires are secure and not burnt.
- Internal fuse: Some Russell Hobbs ovens have an internal fuse on or near the control PCB. Check and replace with the exact same rating if blown. If it blows again, there is an underlying fault.
- PCB failure: If supply and fuse are good but the oven remains dead, the main control PCB is likely faulty and should be replaced.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Main Control PCB
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements