Samsung Door Hinge / Alignment Problem

Oven door does not close fully or sags, causing heat loss and uneven cooking.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Worn or bent door hinges, Loose hinge screws, Deformed door frame, Damaged door gasket causing misfit

Safety first: Turn off power and allow the oven to cool before working on the door.

Inspect hinges:
- Open the door and check hinge arms for bending or looseness.
- Tighten any loose mounting screws.
Check gasket:
- Inspect the door gasket for bulges or hard spots that prevent full closure.
- Replace the gasket if damaged.
Hinge replacement:
- If the door still sags or will not close tightly, replace both door hinges as a set.

Medium 3/5

Oven Door Hinge

Check Price on Amazon

We may earn a commission from links on this page.