Sauter
Voltage Drop or Poor Electrical Connection
Oven display flickers or dims when heating elements turn on
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose mains terminal block screws, Undersized supply cable, Shared circuit overloaded, Failing line filter or power board
How to Fix / Troubleshooting
Safety first: Turn off power at the breaker before inspecting electrical connections.
- Inspect terminal block: Tighten all screws securing the supply wires. Look for signs of overheating or discoloration and replace the block if damaged.
- Check supply cable: Ensure the cable size matches Sauter installation requirements and is not damaged or excessively long.
- Dedicated circuit: Confirm that the oven is on a dedicated circuit and not sharing with high-load appliances.
- Power board and filter: Inspect the line filter and power board for burnt components. Replace if necessary.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Mains Terminal Block
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements