SMEG Door Hinge / Door Alignment Fault

Smeg oven door will not close fully or sits unevenly, causing heat loss.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Worn or bent door hinges, distorted hinge receivers in cabinet, damaged door seal preventing closure, loose door glass or frame

How to Fix / Troubleshooting

Safety first: Ensure the oven is cool before working on the door.

  • Inspect hinges: Open the door and check both hinges for bending, cracks, or excessive play. If the door drops or does not align, hinges may need replacement.
  • Check hinge receivers: Inspect the hinge sockets in the oven frame for damage or looseness. Tighten mounting screws.
  • Door seal: Examine the rubber gasket around the cavity for tears, hardening, or deformation. Replace the seal if it is preventing proper closure.
  • Hinge replacement: Remove the door (many Smeg doors lift off when opened to a specific angle). Replace both hinges as a pair with genuine Smeg hinges to ensure even operation.
Advertisements

Repair Difficulty

Medium 3/5

Required Part

Oven Door Hinge Set
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements