Oven displays F94; may occur during or after self-clean.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Intermittent lock motor, Loose lock harness connector, Faulty lock position feedback to control, Control board lock circuit failure

Safety first: Disconnect power before servicing.

Check connectors: Inspect and reseat all connectors at the door lock motor and control board. Look for loose pins or corrosion.
Wiggle test: With power off, move the harness while checking continuity to detect intermittent breaks. Repair or replace the harness if needed.
Replace lock assembly: If the motor or switches are intermittent, replace the complete lock assembly.
Control replacement: If the lock assembly and wiring are good but F94 persists, replace the electronic oven control board.

Hard 4/5

Oven Door Lock Assembly

Check Price on Amazon

We may earn a commission from links on this page.