Summit
Door Lock Mechanism Stuck Closed
Oven door will not open after a self-clean cycle has completed and the oven has cooled.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Warped or overheated door lock mechanism, Failed door lock motor, Jammed lock linkage, Faulty lock switch not signaling unlock
How to Fix / Troubleshooting
Safety first: Ensure the oven is completely cool. Turn off power at the breaker before attempting manual release.
- Wait additional time: Some models delay unlocking until the internal temperature is below a threshold. Wait an extra 30–60 minutes to ensure full cooling.
- Power reset: Turn off the breaker for 1 minute, then restore power and see if the lock motor cycles to unlock.
- Manual release: With power off, remove the top or rear panel to access the door lock assembly. Locate the manual release lever or move the lock arm gently to the unlock position to free the door.
- Inspect and replace: Check the door lock assembly for heat damage, binding, or broken parts. Replace the assembly if it does not move freely or the motor does not operate when commanded.
Do not force the oven door open by pulling; this can bend the door and damage the hinges and frame.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Door Lock Assembly
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements