Teka Fan Element Failure

Oven fan runs but there is no heat in fan-assisted modes; conventional top/bottom heat may still work.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Open circular heating element, burned connectors at fan element, broken wiring to fan element

Safety first: Isolate the oven from mains power before working inside.

Steps:

Remove the rear inner panel of the oven cavity to expose the circular fan element.
Visually inspect the element for cracks or burn marks.
Disconnect the element leads and test for continuity with a multimeter. Replace the element if open.
Clean and tighten any loose connectors and ensure wiring is not touching moving fan blades.
Reassemble and test a fan-forced mode to confirm proper heating.

Medium 3/5

Circular Heating Element (Fan Element)

Check Price on Amazon

We may earn a commission from links on this page.