Thor Kitchen
Door Alignment / Hinge Failure
Oven door will not close fully; heat escapes and cooking is uneven.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Bent or worn door hinges, Loose hinge screws, Deformed door gasket, Warped oven door
How to Fix / Troubleshooting
Safety First: Turn off power and allow the oven to cool before adjusting the door.
- Inspect hinges: Open the door and check both oven door hinges for bending, cracks, or looseness at the mounting points.
- Tighten screws: Tighten the hinge mounting screws at the door and frame. If screws are stripped, replace them.
- Check gasket: Inspect the oven door gasket for bulges or hardened sections that prevent full closure. Replace if damaged.
- Hinge replacement: If the door sags or does not align with the frame even after tightening, replace both hinges as a set to ensure even tension.
- Verify closure: After repair, close the door and check for uniform contact around the gasket using a strip of paper; it should have consistent resistance when pulled.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Oven Door Hinge Set
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements