Whirlpool
Broil element circuit failure
Oven broil function does not work, but bake works normally.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Open broil element, Loose or burned broil element connection, Failed broil relay on control board, Damaged broil wiring harness
How to Fix / Troubleshooting
Safety first: Disconnect power before servicing.
- Inspect broil element: Look at the upper broil element for breaks or burn spots. Replace if damaged.
- Continuity test: Disconnect one wire from the broil element and measure resistance (typically 10–30 Ω). Replace if open.
- Check wiring: Access the rear of the oven and inspect broil element wiring for burns or loose terminals. Repair or replace as needed.
- Control board: If the broil element and wiring are good, the broil relay on the electronic oven control board may have failed and need replacement.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements