Zanussi Fan Element Not Heating

Oven fan runs but there is no heat in fan-assisted modes

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Open-circuit circular fan element, Loose wiring to fan element, Burnt connector at element terminals, Faulty function selector contact for fan element

How to Fix / Troubleshooting

Safety first: Disconnect power before testing the fan element.

Step-by-step checks:

  • 1. Access fan element: Remove the rear inner panel to expose the circular element.
  • 2. Visual check: Look for cracks or burn marks on the element ring.
  • 3. Measure resistance: Disconnect the element and test with a multimeter. Replace if open-circuit.
  • 4. Inspect connectors: Replace any overheated spade terminals and ensure a tight fit on the new element.
  • 5. Check selector switch/PCB: If the element is good, verify that power is supplied to it in fan mode. Replace the selector switch or PCB if not.

Warning: Always use the correct wattage Zanussi fan element; incorrect parts can cause overheating.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Fan Oven Element (Circular Element)
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements