ASMOKE
No Power to Controller
Grill will not power on at all; no lights on the ASMOKE control panel.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped breaker or GFCI, Faulty power cord, Loose internal power connections, Failed digital controller power supply
How to Fix / Troubleshooting
Safety first: Ensure the grill is unplugged before opening any panels.
- Step 1 – Verify outlet: Test the outlet with another appliance. Reset any tripped GFCI or breaker.
- Step 2 – Inspect power cord: Check the ASMOKE power cord for cuts, burns, or crushed sections. Replace if damaged.
- Step 3 – Check controller connections: Remove the controller and verify the main AC input wires are firmly attached and not burned.
- Step 4 – Look for internal fuse: Some controllers include a fuse on the board. If blown, replace with the same rating. If it blows again immediately, the controller is likely defective.
- Step 5 – Replace controller: If power is present at the cord but the panel remains dead, install a new ASMOKE digital controller compatible with your model.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Digital Controller
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements