Broil King Crown Pellet Display Segment Failure

Display is on but segments are missing or unreadable; some numbers or letters do not show correctly.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed LED/LCD segments, Loose display ribbon cable, Moisture ingress into control panel, Damaged control board display driver

Safety first: Unplug the grill before removing the control panel.

Check connections: Remove the control panel and inspect the ribbon cable or connector between the display and main board. Reseat the connector.
Dry moisture: If condensation or moisture is present, allow the panel to dry completely in a warm, dry area before reinstalling.
Replace control panel: If segments remain missing, replace the control panel or main control board assembly as specified for your Crown Pellet model.

Medium 3/5

Main Control Board

Check Price on Amazon

We may earn a commission from links on this page.