Camp Chef Display / User Interface Failure

Grill powers on but display is blank or unreadable; buttons may or may not respond.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Failed LCD/LED display, Loose ribbon cable, Moisture intrusion into control panel, Faulty main control board

Safety first: Unplug the grill before removing the controller.

Inspect panel: Remove the screws holding the controller and gently pull it out. Check for moisture, corrosion, or burnt components.
Check connectors: Reseat any ribbon cables or display connectors on the board.
Dry moisture: If condensation is present, dry the area with a soft cloth and allow several hours of air drying before reassembly.
Replace controller: If the display remains blank or garbled, replace the entire control board assembly with a Camp Chef-compatible unit.

Medium 3/5

Main Control Board

Check Price on Amazon

We may earn a commission from links on this page.