Enders
Fan Bearing Wear / Debris in Fan Housing
Combustion fan runs but makes scraping or rattling noises.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Ash or debris in fan wheel, Bent fan blades, Worn fan motor bearings, Loose fan mounting screws
How to Fix / Troubleshooting
Safety first: Turn OFF, unplug the grill, and allow it to cool before accessing the fan.
- Access fan: Remove the rear or bottom panel to reach the combustion fan assembly.
- Clean fan wheel: Brush off ash and debris from the blades and housing. Vacuum thoroughly.
- Check for damage: Inspect blades for bends or cracks. Straighten minor bends carefully; replace the fan if severely damaged.
- Tighten mounts: Tighten all fan mounting screws and any brackets that may vibrate.
- Replace fan: If noise persists and the shaft has play, install a new Enders combustion fan.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Combustion Fan (Exhaust Blower)
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements