Enders
Display Module Degradation
Control panel display is very dim, flickers, or segments are missing, but the grill otherwise operates.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Aging LED/LCD display, Loose display ribbon cable, Moisture behind control panel, Voltage irregularities from power supply
How to Fix / Troubleshooting
Safety first: Turn OFF and unplug the grill before opening the control panel.
- Inspect panel: Remove the control panel and check for moisture or corrosion. Dry thoroughly if needed.
- Reseat display cable: Locate the ribbon cable between the display and main board. Disconnect and reconnect firmly.
- Check power supply: Ensure the power supply outputs stable voltage within spec; replace if unstable.
- Replace display/control panel: If the display remains dim or incomplete, replace the Enders control panel assembly or display module as supplied by the manufacturer.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Control Panel / Display Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements