Grill makes loud grinding or squealing noises from the hopper area during operation.

Safety first: Turn OFF, unplug the grill, and empty the hopper before working on the auger.

• Inspect hopper: Look for screws, stones, or other foreign objects mixed with pellets. Remove any debris.
• Access auger assembly: Remove the rear or side panel to expose the auger motor and tube. Disconnect the motor and slide the auger out.
• Check for damage: Inspect the auger flighting for bends or scoring. Check bushings or bearings at each end for wear.
• Lubricate bushings: If bushings are dry but not worn out, apply a small amount of high-temperature, food-safe lubricant to the bearing surfaces (avoid getting lubricant where it can contact pellets).
• Replace worn parts: Install a new Enders auger shaft and/or auger bushing kit if components are excessively worn or bent.