Grill will not power on at all; display is blank and no lights or sounds are present.

Safety first: Ensure the grill is unplugged before opening any panels. Do not bypass fuses with wire or foil.

• Verify outlet: Test the wall outlet with another device. Reset any tripped breakers or GFCI outlets.
• Inspect power cord: Check the Enders grill power cord for cuts, burns, or loose plug blades. Replace if damaged.
• Check main fuse: Remove the control panel or rear access cover to locate the main fuse (often near the power entry). Remove and inspect; replace only with the same type and rating.
• Test power switch: If your model has a rocker or toggle switch, verify it clicks positively and test continuity with a multimeter. Replace if open when switched ON.
• Control board failure: If the fuse and switch are good but there is still no power, the main control board or integrated power supply is likely failed and should be replaced.

After any electrical repair, secure all covers and keep wiring away from hot surfaces.