Water intrusion into hopper or cook chamber after rain, causing pellets to swell and jam.

Safety first: Unplug the grill. Do not attempt to run the auger with wet pellets present.

Step-by-step checks:

• 1. Remove wet pellets: Scoop out and discard all wet or swollen pellets from the hopper and auger intake.
• 2. Dry hopper and auger: Use towels and allow time for the hopper and auger tube to dry completely. A hair dryer on low can speed drying (avoid overheating plastic parts).
• 3. Inspect hopper lid seal: Check for gaps or damage to the lid and gasket. Replace gasket if necessary.
• 4. Use a cover: Protect the grill with a Grilla Grills cover when not in use, especially in wet climates.

When to call a technician: If the hopper or body seams are cracked and allowing water in, structural repair or replacement may be needed.