Landmann
No Power / Dead Control Board
Grill will not power on at all; no lights or display when plugged in.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Blown internal fuse on control board, Faulty power cord, Defective power switch, Failed control board power supply
How to Fix / Troubleshooting
Safety first: Unplug the grill before opening any panels. If you are not comfortable working with electrical components, contact a qualified technician.
- Step 1 – Verify outlet: Test the wall outlet with another appliance. Reset any tripped breakers or GFCI outlets.
- Step 2 – Inspect power cord: Check the Landmann power cord for cuts, kinks, or burn marks. Replace if damaged.
- Step 3 – Check power switch: If your model has a rocker switch, ensure it clicks firmly and is not loose. Replace the switch if it feels spongy or does not latch.
- Step 4 – Internal fuse: Remove the control panel and locate the inline or board‑mounted fuse. If the fuse is visibly blown, replace it with the same rating. If it blows again immediately, there is a deeper electrical fault that requires professional diagnosis.
- Step 5 – Control board replacement: If the fuse and power path are good but the display remains dead, replace the control board assembly.
Advertisements
Repair Difficulty
Hard
4/5
Advertisements