Nexgrill Keypad / Button Panel Wear

Display works but buttons are unresponsive or require very hard presses

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Worn membrane switch, Moisture ingress into control panel, Cracked control overlay, Loose keypad ribbon cable

Safety first: Unplug the grill before opening the control panel.

Check ribbon cable: Remove the control panel and reseat the keypad ribbon cable on the main board.
Dry moisture: If condensation is present, dry the area and allow the panel to air dry fully.
Test buttons: If only some buttons fail, the membrane is likely worn.
Replace control panel assembly: Install a new Nexgrill control panel/keypad assembly, transferring each connector one at a time.

Medium 3/5

Control Panel Assembly

Check Price on Amazon

We may earn a commission from links on this page.