Pit Boss
Failure to Ignite
Grill powers on but will not ignite pellets; no visible smoke or flame during startup.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed hot rod igniter, No pellet feed to firepot, Combustion fan not running, Excessive ash blocking firepot
How to Fix / Troubleshooting
Safety first: Ensure the grill is unplugged and cool before cleaning or accessing the firepot.
- Step 1 – Confirm pellets in hopper: Fill with dry pellets and break up any bridging.
- Step 2 – Clean firepot: Remove internal components and vacuum all ash from the firepot and burn area.
- Step 3 – Check igniter heat: Start the grill on Smoke with an empty firepot. After 3–5 minutes, carefully feel near the firepot for heat. If no heat, replace the hot rod igniter.
- Step 4 – Verify fan and auger: Listen for the fan and watch for pellets dropping. If either is not operating, troubleshoot the combustion fan motor or auger motor and associated wiring.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Hot Rod Igniter
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements