Twin Eagles
No Power Condition
Grill will not power on at all; display is blank and no fans or auger run.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped GFCI or breaker, Faulty power outlet, Damaged power cord, Failed internal power supply or blown internal fuse
How to Fix / Troubleshooting
Safety first: Before opening any panels, unplug the grill. Do not work on live electrical circuits.
Steps to troubleshoot no power:
- 1. Verify outlet: Plug a lamp or tool into the same outlet to confirm it has power. Reset any tripped GFCI or breaker.
- 2. Inspect power cord: Check for cuts, crushed sections, or burned spots. Replace the cord if damaged.
- 3. Check internal fuse: Access the control compartment and inspect the main fuse. Replace only with the exact rating specified by Twin Eagles.
- 4. Inspect power supply module: Look for burned components or bulging capacitors. If the fuse is good but there is still no power, the power supply or control board may be failed.
- 5. Professional service: Replacement of the internal power supply or control board should be done by a qualified technician due to shock and fire risks.
Advertisements
Repair Difficulty
Hard
4/5
Required Part
Power Supply Module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements