Elecro Keypad / Control Interface Failure

Heater controls are unresponsive; buttons do not change settings or start/stop heating.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Failed keypad membrane, Broken keypad ribbon cable, Control PCB input fault, Liquid ingress into control panel

How to Fix / Troubleshooting

Safety first: Disconnect power before working on the control panel.

  • Check for lock mode: Some Elecro models have a key lock or child lock function. Refer to the manual to unlock if active.
  • Inspect keypad: Look for cracks, swelling, or signs of water ingress on the keypad surface.
  • Check ribbon cable: Reseat or replace the ribbon cable between keypad and PCB if damaged.
  • Test with replacement keypad: If available, connect a known-good Elecro keypad to determine whether the fault lies in the keypad or PCB.

Replace the faulty keypad or control PCB as indicated by testing.

Advertisements

Repair Difficulty

Medium 3/5

Required Part

Elecro Keypad / Control Fascia
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements