Kripsol
Gas Leak / Combustion Gas Escape
Heater emits a strong gas smell around the unit, especially near the burner compartment.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Loose gas union at Kripsol gas valve inlet, Cracked burner manifold, Leaking gas valve, Incomplete combustion causing flue gas spillage
How to Fix / Troubleshooting
Safety first: Immediately turn off gas at the main shutoff and switch off power. Do not use open flames or create sparks. Ventilate the area and evacuate if the smell is strong.
- Do not attempt DIY gas repairs: Gas leaks must be located and repaired by a licensed gas technician familiar with Kripsol heaters.
- Visual check only: You may visually inspect for obviously loose unions or damaged piping but do not tighten or disassemble gas components unless qualified.
- Leak testing: A professional will perform a soap-bubble or electronic leak test on all Kripsol gas connections and repair or replace faulty parts.
- Do not operate: Keep the heater off until it has been inspected and declared safe.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Kripsol gas valve and burner manifold
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements