Kripsol
Electrical Short / Overcurrent
Heater trips the electrical breaker when it starts or shortly after.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Shorted Kripsol fan motor, Shorted ignition transformer or igniter, Damaged wiring harness touching metal, Water ingress into electrical compartment
How to Fix / Troubleshooting
Safety first: Leave the breaker off until the fault is found. Do not replace a breaker with a larger size.
- Inspect for moisture: Open the electrical compartment of the Kripsol heater and look for water, condensation, or corrosion. Dry thoroughly and correct any leaks.
- Check wiring: Look for melted insulation or wires pinched against sharp metal edges. Repair or replace damaged sections.
- Isolate components: A technician can disconnect the fan, igniter, and other loads one by one to identify which component causes the trip when re-energized.
- Replace faulty parts: Replace any shorted Kripsol fan motor, igniter, or transformer as needed.
Advertisements
Repair Difficulty
Professional Required
5/5
Required Part
Kripsol combustion fan motor
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements