Kripsol
No Power / Dead Unit
Heater will not start at all; display is blank and no lights are on.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped circuit breaker feeding Kripsol heater, Blown internal fuse on Kripsol control board, Loose power wiring at terminal block, Faulty main power switch on heater
How to Fix / Troubleshooting
Safety first: Before touching wiring, turn off the breaker and verify with a tester that power is off.
- Check breaker: Inspect the electrical panel and reset any tripped breaker supplying the Kripsol heater. If it trips again immediately, do not force it; call an electrician.
- Inspect terminal block: Remove the electrical access cover on the heater and verify that line and neutral wires are securely connected and not burnt.
- Internal fuse: Locate the small fuse on the Kripsol control board. With power off, remove and test it with a multimeter. Replace with the exact same rating if blown.
- Main switch: Ensure the heater’s on/off rocker or rotary switch (if equipped) is in the ON position and functioning.
- Further diagnosis: If power is present at the board but the display remains dead, the Kripsol control PCB or display module may need replacement.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Kripsol control board fuse
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements