Zodiac Delayed Ignition / Combustion Instability

Zodiac pool heater makes loud banging or popping noises during operation.

Advertisements

Safety Warning

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Advertisements

Possible Causes

Dirty burners, Incorrect gas/air mixture, Blocked heat exchanger, Improper gas pressure

How to Fix / Troubleshooting

Safety: Loud bangs can indicate dangerous delayed ignition. Turn off power and gas immediately and do not continue to operate the heater until inspected.

  • Inspect burners: Remove the burner access panel and burner tray. Clean burners and orifices of rust, scale, and debris using a soft brush and compressed air.
  • Check for soot: Look for black soot on the heat exchanger or inside the cabinet, indicating poor combustion. If present, stop and call a professional.
  • Verify air openings: Ensure combustion air inlets are not blocked by leaves, dirt, or stored items.
  • Professional combustion check: Have a qualified technician verify gas pressure, adjust combustion if applicable, and inspect the heat exchanger for damage.
Advertisements

Repair Difficulty

Professional Required 5/5

Required Part

Burner Assembly
Check Price on Amazon

We may earn a commission from links on this page.

Advertisements