AquaJet
No Power to Pump
Pump will not start at all; no display, no lights, and no sound.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped breaker at pool sub‑panel, Faulty GFCI outlet or breaker, Loose or disconnected supply wiring at AquaJet terminal block
How to Fix / Troubleshooting
Safety first: Use caution when working in electrical panels. Turn off the main breaker if necessary and verify circuits are de‑energized.
- Check breakers and switches: Verify that the pool pump breaker and any external disconnects are in the ON position and not tripped. Reset if necessary.
- Test GFCI: If the pump is fed from a GFCI, press RESET. If it will not reset, there may be a ground fault or failed GFCI that needs replacement.
- Verify voltage at pump: With a multimeter and appropriate safety precautions, measure voltage at the AquaJet power terminals. If no voltage is present, trace back through junction boxes to find the open connection.
- Inspect terminal block: With power off, tighten all terminal screws and look for burned or loose wires. Repair or replace damaged components.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Power Terminal Block
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements