DAB
No Power / Dead Pump
Pump will not start at all, no display or indicator lights on DAB pool pump
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped circuit breaker or RCD, Blown internal fuse in DAB control box, Loose or burnt power terminals, Failed DAB control module power supply
How to Fix / Troubleshooting
Safety first: Do not work on live circuits. Turn off the main breaker before opening any enclosures.
Steps to check:
- Check breaker and RCD: Inspect the electrical panel for tripped breakers or RCDs. Reset once; if it trips again, stop and investigate further.
- Inspect power cable and plug: Look for visible damage. Test the outlet with another appliance to confirm power is present.
- Open DAB terminal box: With power off, remove the cover and check for loose, burnt, or disconnected wires. Tighten terminals and look for an internal fuse; replace only with the same rating.
- Test voltage at pump: Have an electrician verify that rated voltage is present at the pump terminals when the breaker is on.
- If voltage is present but pump is dead: The DAB control module or motor is likely failed and should be replaced.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
DAB control module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements