Pump vibrates excessively and may move on the ground during operation.

Safety first: Unplug the pump before touching or moving it.

Steps:

• 1. Level the pump: Place the Flowclear pump on a flat, solid surface such as a concrete pad or sturdy paver.
• 2. Check rubber feet: Inspect the base for missing or damaged rubber feet or pads. Replace them to absorb vibration.
• 3. Clean impeller: Remove the pump lid and basket, then inspect the impeller for trapped debris on one side. Clean thoroughly to restore balance.
• 4. Tighten fasteners: Check and tighten any accessible screws or bolts securing the motor to the pump housing.
• 5. Retest: Reassemble and run the pump. If severe vibration persists, the impeller or motor shaft may be bent and the pump head or motor should be replaced.