Hayward PowerFlo
Improper Reassembly / Misalignment
Hayward PowerFlo pump is significantly louder after a recent impeller or seal replacement.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Impeller rubbing on diffuser or housing, Missing or mis-seated diffuser on PowerFlo, Motor not seated squarely to pump housing, Wrong impeller installed for PowerFlo model
How to Fix / Troubleshooting
Safety first: Turn off power and drain the pump before disassembly.
- Disassemble wet end: Remove the motor from the PowerFlo housing and inspect the impeller and diffuser for rub marks.
- Verify parts: Confirm that the impeller and diffuser part numbers match your specific PowerFlo model.
- Re-seat diffuser: Ensure the diffuser is properly aligned and clipped or screwed into place.
- Reassemble evenly: When reattaching the motor to the housing, tighten bolts evenly in a crisscross pattern to avoid misalignment.
Advertisements
Repair Difficulty
Medium
3/5
Advertisements