Hayward PowerFlo Incorrect Motor Rotation (for reversible motors)

Hayward PowerFlo pump motor runs backwards (for certain replacement motors) causing poor or no flow.

This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.

If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.

Possible Causes

Miswired replacement motor on PowerFlo, Incorrect capacitor or wiring configuration, Wrong motor type installed (non-OEM)

Safety first: Turn off power and disconnect the pump before working on wiring.

Verify motor type: Confirm that the replacement motor is the correct model and rotation for the Hayward PowerFlo pump.
Check wiring diagram: Follow the wiring diagram on the motor nameplate exactly, ensuring correct connections for rotation and voltage.
Test flow direction: After wiring, briefly run the pump and verify strong flow from the return. If flow is weak or reversed, recheck wiring or consult the motor documentation.

Hard 4/5

Replacement motor for PowerFlo

Check Price on Amazon

We may earn a commission from links on this page.