Intex
No Power / Dead Control Panel
Pump will not turn on at all; no lights or display on the control panel.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Tripped GFCI plug, Faulty power cord, Blown internal fuse on control board, Failed control panel PCB
How to Fix / Troubleshooting
Safety first: Ensure your hands are dry and you are standing on a dry surface when working with electrical plugs.
- Check outlet: Plug a lamp or other device into the same outlet to confirm it has power.
- Reset GFCI: If your Intex pump has a GFCI plug, press the RESET button firmly. Then press TEST and confirm it trips, then reset again.
- Inspect cord: Look for visible damage to the power cord and plug. Replace the power cord with GFCI if damaged or if the GFCI will not reset.
- Internal fuse: Some models have an internal fuse on the control board. With power disconnected, open the control housing (if allowed by the manual) and check the fuse. Replace only with the same rating.
- Replace control panel: If the outlet and cord are good and the fuse is intact but the panel remains dead, replace the control panel assembly.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Power Cord with GFCI Plug
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements