Kripsol
Display / Power Supply Fault
Digital display on the Kripsol pump is blank or very dim, but the pump may still run.
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Failed low-voltage power supply on controller PCB, Loose display connector, Sun damage to LCD, Internal short drawing down display voltage
How to Fix / Troubleshooting
Safety first: Turn off power before opening the control housing.
- Check contrast/brightness: Some models have a contrast setting; adjust via the keypad if faint characters are visible.
- Inspect connectors: Open the control panel and reseat the display ribbon cable or connector on the Kripsol controller PCB.
- Look for damage: If the display glass is cracked or the housing is sun-faded and brittle, replace the display/keypad module.
- Power supply check: A technician can measure the low-voltage supply to the display. If absent, the controller PCB likely needs replacement.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Kripsol pump keypad/display module
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements