Lowara
Excessive Vibration / Imbalance
Pump vibrates excessively, causing pipes to shake and noise to transmit through the system
Advertisements
Safety Warning
This repair may involve working with high voltage components or water connections. Always unplug the appliance before removing any panels.
If you are not confident in your ability to perform this repair safely, we strongly recommend contacting a professional technician.
Advertisements
Possible Causes
Impeller imbalance due to debris or damage, Misaligned motor and pump housing, Loose mounting bolts, Rigid pipework with no support or flexibility
How to Fix / Troubleshooting
Safety first: Turn off power before tightening or adjusting any components.
- Check mounting: Ensure the Lowara pump is securely bolted to a solid base. Tighten all mounting bolts.
- Support pipework: Add pipe supports or flexible connectors to reduce stress on the pump unions.
- Inspect impeller: Remove the motor and inspect the impeller for broken vanes or lodged debris. Clean or replace as needed.
- Check alignment: Confirm that the motor is correctly seated and that the pump housing is not distorted by pipe strain.
- Test run: After corrections, run the pump and observe vibration. Persistent severe vibration may require professional balancing or component replacement.
Advertisements
Repair Difficulty
Medium
3/5
Required Part
Lowara pool pump impeller and mounting hardware
Check Price on Amazon
We may earn a commission from links on this page.
Advertisements